Log In
  • en
    • de
SwimLine UVSplash

SwimLine UVSplash

Hanovia’s SwimLine UVSplash UV systems deliver effective treatment (chloramine removal and disinfection) for all leisure facilities from spas through to large competition pools. By using medium pressure lamps we break down not only monochloramine but also di- and trichloramine which are responsible for eye and skin irritation, headaches and unpleasant odours. Using UV in the water treatment process provides bathers and staff with a pleasant and safe environment. UV has the added advantage of being effective against chlorine resistant microorganisms such as Cryptosporidium and is up to 5 times cheaper to maintain and occupies only 1/10th of the space of ozonation equipment.

Key Features What it gives you benefits for you
*UV intensity monitor Continuous verification of performance with in-built low intensity alarm Easy to monitor and log system performance
Flow meter input *Real time adjustment of lamp power based on flow Saves power
Medium pressure lamp Provides UV light at 200 to 400 nm wavelengths ideal for the destruction of mono-, di- and trichloramine Visibly clear water with reduced odours
Reduced corrosion risk
Minimises bathers’ eye and skin irritation
Provides germicidal wavelengths to disinfect the water Protect bathers from chlorine resistant microorganisms such as Cryptosporidium or Giardia
*Automatic wiper (quartz cleaning) Self cleaning
Designed specifically for pools *UVShieldTM power cut-out for lamp access Enhanced operator safety when changing a lamp
*Water leak detection Increased bather safety when used with a strainer
Material: Stainless steel 316L / 1.4404
Internal finish: As made pipe and tube, welds as laid, electropolished and passivated
External finish: Sateen polish (120 grit) electropolished and passivated
Process (mating) connections: Flange EN 1092-1 PN16
Drain connection: BSPT
End plate: Removable end plate
Degree of protection: IP65 equivalent to NEMA 4 but not for outside use
Arc tube (lamp): Medium pressure
Arc tube enclosure: Pure quartz
Number of arc tubes (lamps): 1 to 4 dependent on model
Expected lamp life: 4000-8000 hours
Temperature sensor: Yes
Working fluid temperature: 5°C to 60°C
Hydrostatically pressure tested: Yes to PED requirements EN 13445
Chamber mounting: Horizontal only
Operating pressure: 6 bar
Pressure loss: Typically < 70 mbar
Seals: EPDM
Material: Polyester coated carbon steel
Degree of protection: IP54 NEMA 12
Supply voltages (nominal): SL UVSplash 60-120 95 V to 260 V SL UVSplash 195-705 190 V to 480 V SL UVSplash 850-990 380 V to 480 V 50/60 Hz (voltage tolerance ± 10% of nominal)
Operating temperature range: 5°C to 40°C
Relative humidity: <95% non-condensing
Cooling fans: Yes
Interconnecting cable lengths: 10 m cabinet to chamber
Operation and Maintenance manual and printed Installation and Commissioning manual in Chinese, English, French, German and Spanish
Flange options: ANSI 150 (with NPT drain), JIS, Table ‘E’
Lead length: 20 m, 30 m or 50 m cabinet to chamber
Wiper: Automatic (electrically operated or hand operated on SL UVSplash 60 to 600)
UV monitor: Wet UV monitor (to minimum UVT)
Power adjustment: 4 level power stepping
Skid mounting
Vent valve: Manual valve
Aggressive water package: For 400 ppm to 20000 ppm chloride water
UVShieldTM: Power cut-out for lamp access
Water leak detection: Detects water leaks from quartz sleeve
Chamber configuration: S shape
4-20 mA passive or active outputs: UV intensity, UV dose
VFC outputs: System warning, lamp ready, low UV intensity, common trip, remote reset, ELCB or water leak, system available, local or remote mode
4-20 mA passive or active input: Flow meter
VFC inputs: Remote stop/start and remote reset
CE marked, UL listed E 149108

Coming Soon

Connect With Us